Manually Stopping a Roast on KL Nano

Have you discovered a good way to do something with your Kaffelogic? Share it here.
Rate this topic
Post Reply
Yochiya
Posts: 19
Joined: Sat 11 Sep, 2021 7:15 pm
x 3

Manually Stopping a Roast on KL Nano

#2206

Post by Yochiya » Mon 27 Sep, 2021 10:11 am

During a roast, hit the - button until it enters cooling mode.

You can change a a profiles roast level at any time during a roast by hitting the - or + buttons.

When roasting you might decide to manually intervene, for me the following reasons might cause this:
  • I realise I want a filter and not espresso roast
  • I think about my previous roast and decide to go 2 steps up or down (bracketing)
  • First crack is somewhat sooner/later than anticipated
  • The bean smells and looks like I want it to
Adding it here as It was not overly clear to me from RTFM.
Attachments
Screen Shot 2021-09-27 at 7.09.45 am.png
Screen Shot 2021-09-27 at 7.09.45 am.png (736.17 KiB) Viewed 149 times

BenN
Posts: 180
Joined: Tue 28 May, 2019 7:26 pm
Location: Nelson, New Zealand
x 13

Re: Manually Stopping a Roast on KL Nano

#2207

Post by BenN » Mon 27 Sep, 2021 12:33 pm

It used to be double press the start button to force stop during the roast.
I think it was changed to start then process minus "-" button to do the stopping.

below is from firmware 7.50 change log:
"prevent cooldown from stopping if play button pressed, then roast automatically ends, then user hits minus button"
Last edited by BenN on Mon 27 Sep, 2021 1:23 pm, edited 1 time in total.
Ben

Geronimo
Posts: 135
Joined: Mon 03 Jun, 2019 11:10 am
x 15

Re: Manually Stopping a Roast on KL Nano

#2208

Post by Geronimo » Mon 27 Sep, 2021 12:54 pm

BenN wrote:
Mon 27 Sep, 2021 12:33 pm
It sued to be double press the start button to force stop during the roast.
I think it was changed to start then process minus "-" button to do the stopping.

below is from firmware 7.50 change log:
"prevent cooldown from stopping if play button pressed, then roast automatically ends, then user hits minus button"
Yeah I had accidentally stopped roast with a double push several times. It’s certainly much better using the current setup, as I am always changing roast levels during roast and manually stopping.

Cheers
G

BenN
Posts: 180
Joined: Tue 28 May, 2019 7:26 pm
Location: Nelson, New Zealand
x 13

Re: Manually Stopping a Roast on KL Nano

#2209

Post by BenN » Mon 27 Sep, 2021 1:25 pm

Geronimo wrote:
Mon 27 Sep, 2021 12:54 pm

Yeah I had accidentally stopped roast with a double push several times. It’s certainly much better using the current setup, as I am always changing roast levels during roast and manually stopping.

Cheers
G
Same here, it was quite prone to stop accidentally. I'm grad it has updated to current setup,
Ben

Post Reply