Page 1 of 1

Wednesday Profile Development

Posted: Mon 25 May, 2020 12:49 pm
by Wayne
Good day all

I hope the weekend went well and all roasting and tasting is meeting all your expectations .

There have been receiving great results over the past week with regards to the profiles developed for Kaffelogic users and this feedback , both positive and negative , is great for the on going development and creation of these profiles.

Over the last few weeks , through our Virtual Cafe , we have been learning the essentials on how to understand Kaffelogic profiles and the elements that the Kaffelogic Studio allow us to change and or control .

The point of this exercise is to put all of what we have learnt into profile building . A fun exercise for you all that have , have not , started using Kaffelogic Studio to experiment and start practically applying this newly acquired knowledge.

WEDNESDAY ROASTING FUN

Please find 3 test profiles below . The start of ALL the roasting profiles up to 2minutes of roasting time are all correct .

The REST of the profile - Should be YOUR design .

Pick 1 or 2 of the profiles below and create the rest of the profile to give us an awesome tasting coffee OR create your own profile from scratch . Choice is yours!

PLEASE NOTE - IF YOU WISH TO CREATE YOUR OWN AND CHOOSE NOT TO USE THE ABOVE 3 EXAMPLES - FEEL FREE TO DO SO !!

The profile should have the following :
  • Predominant Decreasing ROR throughout roast
  • Power graph should be Increasing as much as possible throughout the roast
  • The duration of the roast should be no longer than 12minutes
  • Some form of details for the prescribed ideal roast - brewing information should be placed in the "About This File " section of the roast
  • Please list what coffee Origin was used and what altitude the coffee origin is in the "About This File " section
I have attached the Kaffelogic Roasting Companion to read over and this will provide assistance with understanding the Kaffelogic System .

Have fun Ladies and Gentleman - Good Roasting and if you need any help . Please do not hesitate to contact me/text on 0220570818 OR email on [email protected]

Re: Wednesday Profile Development

Posted: Tue 26 May, 2020 3:01 pm
by Simon
Hi Wayne,

Here's an attempt at a functioning profile created from the first of your three. I tried to add a boost around first crack to counter the behaviour Chris showed us where the beans absorb heat in a burst as they crack.

Intending to use this on my Peruvian Blend (washed, 1200m).

cheers

Simon

Re: Wednesday Profile Development

Posted: Wed 27 May, 2020 10:42 am
by Nutta
Hi,

Not based on one of the starter profiles, but one I've been working on. Haven't had a chance to do much since Monday, but here's the profile and a log...

Profile:
CS Light 01.kpro
(1.9 KiB) Downloaded 87 times
Log:
log0515.klog
(82.94 KiB) Downloaded 90 times

Cheers,
Nick

Re: Wednesday Profile Development

Posted: Thu 28 May, 2020 10:43 am
by Simon
Here's a log of my roast. haven't viewed it in Kaffelogic Studio yet. Can report no tipping, moderately loud first crack. Roasted to level 4. Tried chewing on a few and they tasted great. Am about to make espresso from them.