Search found 417 matches

by kaffelogic
Tue 01 Jun, 2021 2:55 pm
Forum: Comments, questions, and issues
Topic: Studio Fails to Load on Fedora 34 Gnome on Wayland
Replies: 1
Views: 84

Re: Studio Fails to Load on Fedora 34 Gnome on Wayland

Angela wrote:
Fri 28 May, 2021 10:58 pm
Snaps and Flatpacks seem the obvious solution.
Thanks for bringing this to my attention Angela. The toolchains are pretty mature and it should be very easy to make the transition. I will look at it with the next update and assess the amount of work involved.
-Chris
by kaffelogic
Fri 21 May, 2021 5:34 pm
Forum: Updates and alerts from Kaffelogic
Topic: Kaffelogic Studio v4.2.11 beta and Firmware v7.5.0.1124 released
Replies: 0
Views: 162

Kaffelogic Studio v4.2.11 beta and Firmware v7.5.0.1124 released

Kaffelogic Studio This is the beta release of v4.2.11. All you keen beta testers are encouraged to download and install it now. The most important new feature is automatic backup of your memory stick. Every time you plug your memory stick in to your laptop while Studio is open, it automatically sca...
by kaffelogic
Wed 10 Mar, 2021 11:25 am
Forum: Comments, questions, and issues
Topic: warped plastic top
Replies: 1
Views: 300

Re: warped plastic top

We are now using glass fibre reinforced plastic for the tops. Units manufactured since later in 2020 use the glass fibre. Customers with machines showing significant warping in the plastic top (we have found the degree of warping to be quite variable so not all machines are equally affected) should ...
by kaffelogic
Fri 05 Mar, 2021 7:23 am
Forum: Updates and alerts from Kaffelogic
Topic: Big Sur compatibility
Replies: 0
Views: 331

Big Sur compatibility

Mac users will be aware that some software products are giving problems with the latest version of the Mac OS, Big Sur. At this time we are not aware of any problems with Kaffelogic Studio under Big Sur. Whew! Please make sure you let us know if you do experience any problems. Kaffelogic service tec...
by kaffelogic
Mon 01 Mar, 2021 5:41 pm
Forum: Comments, questions, and issues
Topic: Bizarre roaster behaviour
Replies: 7
Views: 676

Re: Bizarre roaster behaviour

This is a fault. The thermal fuse (which is part of the element unit) has, to use a not-too-technical term, gone on the blink. It is faulty, and instead of just burning out as it should in an overheating situation it is going off and back on again in a normal heating situation. You can see this happ...
by kaffelogic
Thu 18 Feb, 2021 4:58 pm
Forum: Comments, questions, and issues
Topic: New Chaff Corrector
Replies: 7
Views: 818

Re: New Chaff Corrector

Yes the glass inner will come out for wiping, washing or dishwasher. Capacity will be less than the existing, but thanks for pointing out that it needs to be tested with 'chaffy' beans. There is huge variation in amounts of chaff produced.
by kaffelogic
Sun 14 Feb, 2021 12:17 pm
Forum: User contributed roast profiles
Topic: Fresh roasted Almonds anyone?
Replies: 2
Views: 1172

Cashews and Hazel Nuts too

After further experimentation with roasting nuts using David's profile, I have had great success with cashew and hazel nuts. I have made a change to allow the roast to be automatically stopped earlier, so the levels have been shifted down, but nothing else has changed. I have called the modified pro...
by kaffelogic
Wed 10 Feb, 2021 11:35 am
Forum: Updates and alerts from Kaffelogic
Topic: Studio 4.2.9 and Nano 7 Firmware 7.4.6 released
Replies: 0
Views: 330

Studio 4.2.9 and Nano 7 Firmware 7.4.6 released

If you are a beta tester, and you are up to date with beta copies, you do not need to do anything because the release uses the same files you have already downloaded. Thank you for being a beta tester and helping us keep the quality of our releases up. You can verify that you are on the latest versi...
by kaffelogic
Tue 09 Feb, 2021 10:31 am
Forum: User contributed roast profiles
Topic: Steve's Ultimate Profiles 100g - Constantly Declining Fan Profile (Fan Cal 0.91)
Replies: 70
Views: 11301

Re: Steve's Ultimate Profiles 100g - Constantly Declining Fan Profile (Fan Cal 0.91)

Thanks for your detailed reply ... much appreciated. It seems if I wish to continue my experiment with power profile zones I would need to control the supply voltage... having no idea how to accomplish this ... could you recommend a suitable device? Cheers Mark I am aware at least one user who runs...
by kaffelogic
Mon 08 Feb, 2021 1:34 pm
Forum: Comments, questions, and issues
Topic: New feature requested: button lock
Replies: 11
Views: 1098

Re: New feature requested: button lock

Thanks everyone for your thoughtful responses. My preference is to keep the user interface as simple as possible, and as there seems to be reasonable acceptance of the existing, so I won't embark on implementing a button lock at present.